Have you ever seen a book that tells you where NOT to weld? This one does! "Welding Secrets" was written by a welder with 49 years experience. Amazing facts explained in simple terms with 75 photographs and 10 sketches.

"Welding Secrets" explains why a weld bead shrinks more where it stops than it does where it starts. Also, pictures of test welds to show you the difference between "free expansion" and "confined expansion". If you believe that the stresses caused by welding do not harm the workpiece you are right, except when the weld is made under confined expansion!

Place a warped angle iron frame on a flat surface. Two corners will be higher than the others. On these, place an adjustable wrench on the flat leg, one inch from the inside corner, and push down on the handle. When the leg is slightly bent it springs back a little. This creates a twisting force on the angle iron, which pushes down on the higher corner. An angle iron frame has sixteen places which can be bent to flatten it. (more details plus 7 pictures in the book!)

How to flatten a warped steel frame in one minute without heat or hammer.

How to build up a worn shaft and prevent it from breaking off at the end of the welds.

How to remove a bad bearing race from a hole.

How to shrink a nut. How to expand a nut.

How to square a frame by welding or peening.

How to weld thick and thin metals together.

How to burn a lap weld and save both pieces.

How to run a smooth bead.

How to temper a chisel without using heat colors.

How to weld overhead.

How to repair a crack in a pipe or tubing.

How to shrink a steel pulley

How to burn a nut off a bolt and save the threads.

How to reinforce the inside of tubing.

How to flux melted lead, babbitt or solder.

How to flatten a bulged circle.

How to remove a stuck sleeve from a hole.

How to remove a broken off bolt.

How to burn through a large steel shaft.

How to remove a broken off tap.

How to make a smooth cut with a cutting torch.

And much much more!!!

Lack of knowledge is no defense in a court of law! Surely you have read about the lawsuits caused by the breast implants and asbestos. Research has proven that a weld in the wrong place will cause a break. Breaks cause accidents which can kill people! If you weld something for someone else and it breaks, causing damage, you can be SUED! You could lose everything you own. Learn about the places that should NOT be welded.

Send your name, address and $39.95 + $3.85 for priority mail per book to:

Click here for the or email to rolshafer@frontiernet.net

 

Cherokee Industries

2714 Hadar Dr.

Ord, NE 68862

Ph.  800-658-4443

       308-728-3113

Fax  319-856-0345

Fed. I.D. # 47-0715475

   

Distributor Inquiries Welcome

back to cherokee homepage