• AM-308

• ￥12,800

FEATURES:

• High-quality low-noise Mic. Amp built-in.
• Highly sensitive condenser microphone and flexible gooseneck employed.
• Voice quality selector switch for FM/SSB.
• Equipped with electronic touch switch for PTT operation( With LED TX indicator ).
• Provided with UP and DOWN switches.
• Usable with microphone cable equipped with power feeding line ( "D" series cables).
• Connectable with every transceiver available in the market by the conversion cables (microphone interconnecting cables ) optionally available.

SPECIFICATIONS:

• Microphone : Wide-band Electret Condenser Mic. with IC Built-In.
  IC : 1 piece, Transistor : 7 pieces, Diode : 5 pieces
• Output Voltage : 0 - 30 mV ( RMS )
• Output Impedance : 500 - 100k ohms
• Power Voltage : DC 3 V ( UM 3 x 2 pcs. )
  "D" series Mic. Connecting Cord : DC 5 V - DC 9 V
• Power Consumption : 1.5 mA ( RX ) 2.5 mA ( TX )
• Dimensions ( mm ) : 100 (W) x 155 (D) x 310 (H)
• Power Voltage :DC 12V - 15V
• Weight : 450 g

PDF

• AM-508E

• ￥14,800

FEATURES:

• High-quality Compressor Amp. built-in.
  Capable of sending our constant voice level regardless of voice, whispering, loud, etc.
• Provided with High-sensitivity Electret Condenser Microphone.
  The Electret Condenser Microphone ensure the better voice quality.
• Provided with FM/SSB Audio Quality Selector Switch.
• Provided with Electronic Switches.
• Usable with microphone cable equipped with power feeding line ( "D" series cables).
• Equipped with UP/DOWN switches and LED Transmitting Indicator.
• Connectable with every transceiver available in the market by the conversion cables ( microphone interconnecting cables ) optionally available.

SPECIFICATIONS:

• Microphone : Electret Condenser Microphone
• IC : 1 piece
• Transistor : 16 pieces
• Diode : 6 pieces
• Output Voltage : 0 - 30 mV ( RMS )
• Output Impedance : 500 - 100K ohms
• Compressor Level : 45dB ( HIGH ) 10dB ( LOW )
• Power Voltage : DC 3 V ( UM3 x 2 )
• Dimensions ( mm ) : 100 (W) x 155 (D) x 310 (H)
• Weight : 450 g

PDF

• AM-708E

• ￥27,800

FEATURES:

• Selectable for 2 sets of transceivers at once by slide switch.
• High Sensitivity Electret Condenser Microphone Element equipped.
• High Quality Compressor Amplifier ( High - Low selectable ) built-in. It sends out always constant and optimum level without distortion regardless of audio input level.
• Equipped with FM/SSB Audio Quality Selector Switch for optimum operation.The Electret Condenser Microphone ensure the clearer voice quality in FM condition and ensure the better voice quality in the SSB condition.
• Non-Modulation Prevention Circuit built-in.
  After continuous transmitting for a few minutes, the alarm circuit will be activated with alarm sound for 30 seconds.Then, the condition returns to receiving mode automatically.
• Battery-Check Circuit built-in.
  Turn the power switch on ( by selecting "FM" or "SSB" position ), and the level meter indicates the battery condition with power voltage for a few seconds.
• Connectable with the microphone interconnecting cable provided with power feeding line. ( ADONIS terminal arrangement indicates it as ''B'' in the center of connector.)
• Usable with microphone cable equipped with power feeding line ( "D" series cables ).
• You can choose the power source from dry batteries ( UM 3 x 2 ) or transceiver ( microphone connector DC 5 - 9V / 20mA minimum).

SPECIFICATIONS:

• Microphone : High Sensitivity Electret Condenser Mic.
• IC : 2 pieces
• Transistor : 20 pieces
• Diode : 13 pieces
• Compressor Level : HIGH : 45dB LOW : 35dB
• Output Voltage : COMP : 0 - 30 mV ( RMS ) MANUAL : 0 - 70 mV ( RMS )
• Matching Output Impedance : 500 ohms - 100k ohms
• Power Voltage : Battery : DC 3 V ( UM3 x 2 pieces )
  Mic. Cable ''D'' series : DC 5 - 9 V
• Current Consumption : at Receiving : 3 mA, Transmitting : 6 mA ( approx )
• Alarm sound : approx. 4.5KHz Intermittent Tone
• Flexible ( Gooseneck ) Pipe : φ 8mm, ( Length : 150mm )
• External Size : 182 (W) x 130 (D) x 322 (H) mm
• Weight : approx 830 g ( Not included dry battery )

PDF